⚡ Live Topology Simulator

How an Industrial Mesh Network Works

Instead of all machines relying on a single fragile Wi-Fi router, each device connects directly to its neighbors. If a node fails, data automatically reroutes in milliseconds with zero downtime.

Interactive Network Topology Simulator

Click any node to simulate machine failure and watch real-time self-healing

Steel Shield / Wall
Edge GatewayHOST
CNC Machine #1
Packaging Line
Mesh Relay A
Access / RFID
Oven Telemetry
Protocol
ESP-NOW (P2P MAC)
Latency
< 4.3 ms / hop
Resilience
99.2% (Self-Heal)
Executive Summary (For Recruiters & Non-Engineers)

Why Roman built this and how it creates immediate business value:

The Relay Concept (No Dead Zones)

Instead of 50 machines struggling to connect to a single Wi-Fi router through reinforced concrete and steel walls, each machine talks directly to its closest neighbor. Every device acts as a signal relay, naturally blanketing the entire plant.

Dynamic Self-Healing (Zero Single Point of Failure)

In a standard office setup, if the router crashes, everything stops. In our mesh, if a machine is unplugged or obstructed, packets automatically discover an alternative detour in under 10 milliseconds. Production never halts.

High ROI & Zero Cabling Cost

Eliminates tens of thousands of PLN in expensive industrial Ethernet cabling, outdoor repeaters, and IT overhead. Devices form their own private network instantly upon power-up without Wi-Fi passwords.

Architectural Comparison

Traditional Factory Wi-Fi vs. Roman's ESP-NOW Mesh

Central Point of Failure
✕ Traditional Industrial Wi-Fi

High: If the central AP drops, all shop-floor telemetry halts.

✓ ESP-NOW Industrial Mesh

Zero: Distributed P2P with dynamic multi-hop rerouting.

Factory Obstacles (Metal & Concrete)
✕ Traditional Industrial Wi-Fi

Severe packet loss and blind spots behind heavy machinery.

✓ ESP-NOW Industrial Mesh

Packets simply hop around physical obstacles through neighboring nodes.

Packet Latency
✕ Traditional Industrial Wi-Fi

50 – 250 ms with high jitter and TCP retransmission delay.

✓ ESP-NOW Industrial Mesh

Sub-10 ms deterministic delivery (Layer 2 MAC action frames).

Infrastructure Cost (CAPEX)
✕ Traditional Industrial Wi-Fi

High: Enterprise access points, switches, cabling, IT licenses.

✓ ESP-NOW Industrial Mesh

Low: Built natively into low-cost ESP32-C6 microcontrollers.

Setup Complexity
✕ Traditional Industrial Wi-Fi

SSID provisioning, certificate management, IT firewalls.

✓ ESP-NOW Industrial Mesh

Pre-paired hardware MAC routing; runs immediately on boot.

Under the Hood

Technical Architecture Under the Hood (For Engineering Leads & Architects)

Hardware Platform
Espressif ESP32-C6 (32-bit RISC-V @ 160MHz, IEEE 802.15.4, 2.4GHz Wi-Fi 6)
Wireless Protocol
ESP-NOW (Connectionless Layer 2 MAC action frames, no handshake latency, ~250B payload)
Industrial Bus Bridge
RS485 half-duplex industrial transceivers + Wiegand 26/34-bit RFID reader decoding
Edge Gateway & Buffering
Raspberry Pi 4 running local SQLite/FastAPI caching and bi-directional cloud dispatch
Explore the Full Engineering Case Study

Distributed Embedded Mesh & Edge IoT

Deep dive into the architecture, schematic diagrams, FreeRTOS queue management, and test bench metrics for this system.